Welcome to Jiangsu Yuantong Electric Co., Ltd.
Mon–Sat 08:00–20:00 (Beijing Time)
English
العربية
Français
Русский
Español
Português
Deutsch
Italiano
Nederlands
Bahasa IndonesiaPOLE-MOUNTED TRANSFORMERS
Pole-Mounted Transformers for Overhead Distribution Lines
Yuantong builds single-phase and three-phase pole-mounted distribution transformers, including SBH15 amorphous alloy units with low no-load loss. They mount directly on a utility pole and step overhead line voltage down to the low voltage used by homes, farms and small businesses. Every unit is routine-tested before it ships.
BASIC PARAMETERS
Technical Parameters at a Glance
| Item | Range |
|---|---|
| Phase | Single phase or three phase |
| Rated capacity | 25 – 100 kVA (larger amorphous ratings per datasheet) |
| Rated voltage (HV) | Per your distribution line voltage |
| Low voltage | 120/240 V, 0.4 kV or as specified |
| Core | Silicon steel or amorphous alloy (SBH15) |
| Insulation | Oil-immersed, fully sealed |
| Mounting | Pole-mounting brackets |
| Standards | IEC or GB, or the standard in your specification |
Need a rating outside these ranges? We design to your specification.
PRODUCT RANGE
Pole-Mounted Transformer Models
Choose a series to see full specifications, or send us your rating for a direct quotation.
SELECTION GUIDE
Which Pole-Mounted Model Fits Your Project?
| Model | Phase | Capacity | Core | Best for |
|---|---|---|---|---|
| Single-phase 25 kVA | Single phase | 25 kVA | Silicon steel | Rural and residential feeders |
| Single-phase 50 kVA | Single phase | 50 kVA | Silicon steel | Residential feeders |
| Pole-mounted distribution | Single / three phase | 25–100 kVA | Silicon steel | Overhead utility lines |
| SBH15 amorphous | Three phase | Per datasheet | Amorphous alloy | Networks that need the lowest no-load loss |
CONSTRUCTION & CHARACTERISTICS
How Our Pole-Mounted Transformers Are Built
APPLICATIONS
Where Our Pole-Mounted Transformers Are Used
Grid & Substations
Overhead utility distribution lines
Mining & Industrial
Small workshops and pumping stations
Wind & Solar
Small distributed solar connections
Commercial & Data Centres
Rural shops and residential areas
QUALITY & TESTING
Tested Before It Leaves the Factory
PROJECT REFERENCES
Pole-Mounted Transformer Projects
FAQ
Pole-Mounted Transformer FAQ
Our standard pole-mounted transformers range from 25 to 100 kVA, in single phase or three phase. Send us your line voltage and load for a recommendation.
An amorphous alloy core has much lower no-load loss than silicon steel. Because pole-mounted transformers are energised all day, this lowers the lifetime energy cost of the network.
Yes. We build the secondary voltage to your specification, including 120/240 V split-phase or 0.4 kV.
The minimum order is one unit. Standard ratings typically ship 15–30 days after the order and deposit are confirmed; custom designs depend on the specification.
We design to IEC or GB standards, or to the standard named in your specification. A routine test report is supplied with every unit.
GET A QUOTE
Quotation Within 24 Hours
Send us your specification and our engineers will reply with a technical offer, loss values and lead time.
Include these details for a fast quote:
- Single or three phase
- Rated capacity (kVA)
- Primary line voltage
- Secondary voltage
- Silicon steel or amorphous core
- Standard (IEC, GB or other)
- Quantity and destination port